RoboDK settings

This example uses the Motoman GP180 robot, a cutting tool mounted on a spindle and a table to hold the part in place.

Load the station:

1.Select File➔  Open

2.Locate the 3-axis mold machining example fromRoboDK’s examples section:           
C:/RoboDK/Examples/ Plugin-Mastercam-3-Axis-Mold-Machining.rdk.

Now that you have loaded the station you can open Mastercam and load the project from C:/RoboDK/Other/Plugin-Mastercam/Examples/Mold.mcam.