Introduction

This example will help you understand how you can configure robot machining settings in RoboDK and how to convert a 5-axis robot machining job to a robot machining simulation and robot program.

Once you have defined your machining strategy with your CAM software, you can export your machining program as a Gcode or as an APT file so that you can load it in RoboDK to create a robot machining project. In this example, we will be using an APT file to create a robot machining project.

You can find this sample RoboDK project int the following location: C:/RoboDK/Other/Plugin-MecSoft/Car-Model.rdk.

You can find the sample RDK project int the folder C:/RoboDK/Other/Plugin-MecSoft/Car-Model.rdk.