This section shows how to create the spot welding points on the car frame to move the spot welding gun to.

Let's assume that you need to spot-weld the front and rear part of the car frame. Using the Point Utilities Add-in, you can place spot welding points directly on surfaces. After converting points to targets (this is a built-in feature of the Point Utilities add-in) you can realign the targets' orientation relative to the TCP angles:

Example Spot Welding - Image 8

Note: If you need to place a point at a specific location, you should have geometric features on the model (e.g., features that can be detected with the Measure tool).

Spot Welding Points