Follow this procedure to calibrate a 2-axis turntable.

1.Select Utilities➔ Define Reference

2.Select the Reference Frame to define/calibrate.
Alternatively, right click a Reference Frame and select Define Reference Frame.

3.Select the method Turntable Calibration (2 Axes)

General - Image 22

4.Select Calibrate using joints (default setting). You can change it to points (instead of joints) if you have the XYZ position of each point with respect to the robot base frame.

5.Specify the robot if more than one robot is available in the station.

6.Select the number of points you would like to take (the minimum required is 6 points: 3 points for each axis).

Important: You should probe the same point of the turntable, with the robot, as you move the turntable. The turntable needs to be moved in the positive sense of rotation for each axis. You should first move axis 1, then, axis 2 (as shown in the previous picture). It is recommended to use a minimum of 12 to 20 points to have a better understanding of the errors involved in moving the turntable.

Note: The number of points used to identify axis 1 doesn’t need to match the number of points used to identify axis 2 (for example, you can use 4 points to identify axis 1 and 6 points to identify axis 2).

Important: The Z axis of the calibrated reference will match axis 2. The X axis of the calibrated reference will match the common normal. Also, the origin of the calibrated reference will be placed at the intersection between axis 2 and the common normal (point on axis 2 that is closest to axis 1).

7.Start filling the table with the robot joint positions (or points).

General - Image 23

Tip: The list of configurations can be filled manually or by using the copy/paste buttons (buttons at the right of the joint values).

Tip: If you are connected to the robot you can select the “Get p” buttons to retrieve the robot joints directly from the robot. More information to set it up is available in the Robot Drivers Section. This option is not available for all robots and it may require additional software options sold by the robot manufacturer.

Important: If you enter the values manually it is recommended to provide each joint value with at least 4 decimals (when providing joint values). The allowed number of decimal values can be changed in Tools➔Options➔Accuracy➔Max Decimals.

Note: RoboDK will keep a copy of the provided data in the RDK station once you select update.

8.Finally, select Update to apply the new position to the reference frame selected in the RoboDK Station.

9.Select Show Errors to display the error level at each point (the distance errors are equivalent to the planar errors and the radial errors combined)

General - Image 24

Calibrate a two-axis Turntable