You can easily modify post processor settings using a graphical user interface. The post processor editor allows you to modify variables defined in the post processor that are specific to your robot controller.

The post processor editor is a plugin that helps customize your post processors. You can easily download and install the plugin from the following page: https://robodk.com/addin/com.robodk.plugin.postprocessoreditor.

Follow these steps to open the post processor editor:

1.Select Program➔Post Processor Editor.

2.Select the post processor you want to customize.

3.Select OK. A new window will open, and you’ll see the variables you can modify.

4.Select Save Post Processor as…

5.Enter the name to save it.

Important: You should not override the default post processors. Instead, you can use your own unique names when you create your own post processors. The default post processors will be set back to its default value if you reinstall RoboDK.

Post Processors - Image 3 Post Processors - Image 4

For example, if you select the Fanuc R30iA post processor you’ll see the window shown in the previous image.