RoboDK TwinTool supports multiple linear gage sensors, including Keyence, Mitutoyo, Sylvac and others. Some communication protocols include USB, Ehternet/IP and RS232. An approximated price for an industrial grade linear gage sensor is 1,500.00 Euros.

The linear gage sensor should have an accuracy of 0.005 mm or better and a travel of 10 mm or more. It is recommended to have a measurement frequency of 50 samples per second or more. This sensor is not provided or sold by RoboDK. We recommend contacting your local distributor to supply this sensor required to use RoboDK TwinTool.

The following list shows a sample order for a Keyence linear gage:

● Keyence GT2-P12 - Pencil type gage

● GT2-UB1 - USB connection unit

● OP-87716 - Cable extension

● OP-76875 - Suggested mounting bracket for the gage

● 25 mm flat contact point with M2.5x0.25 thread needed (not provided by Keyence)

The following list shows a sample order for a Mitutoyo linear gage:

● Mitutoyo 542-191 - LG 100 gage

● Mitutoyo 542-081A - EJ Counter + AC

● Mitutoyo 21HZA149 - USB interface (RS232 also supported)

● 25 mm flat contact point with M2.5x0.25 thread needed (not provided by Mitutoyo)

Linear gage sensor