You need the IP of your Mecademic robot to run or transfer programs from RoboDK. Mecademic robots use the IP 192.168.0.100 by default. You can make sure if the IP of your robot is correct by entering the IP in a browser to access the web interface.

Make sure to properly setup a network connection if you are unable to see the robot web interface as shown in the following image.

Robots Mecademic - Image 1

Note: The robot must be connected to the computer using an Ethernet connection (direct connection or through a network). A Ping test allows testing if the Network link has properly been stablished.

Retrieve the Mecademic robot IP